Showing posts with label Hirst Arts. Show all posts
Showing posts with label Hirst Arts. Show all posts

Monday, May 27, 2013

The "insert your name here" Inn

Hi, folks. This is a little Inn my son Mark built a while back using a "Buildings of Malifaux" set made by WorldWorks Games for Wyrd Miniatures. This was made from 1 Building set and 1 set of clips.  Others have reviewed these sets in the past so I won't spend a lot of time talking about it. I don't like it much. It's wonky when you try to build upwards and the plastic clips get in the way of furniture placement. Graphics are nice, though. This is mainly about some of the furnishings, most of which are Hirst Arts.

Three story Inn. As you can see, it doesn't stack too well, but the graphics are good.
 A different angle. 28mm D&D minis for scale.
Another angle. I like the balcony these sets allow.
A shot of the top floor with the roof removed. The rug has been featured in previous posts. The bookcase is an old scratchbuild. Globe from Dollhouse set, the bed is another old scratchbuild. I imagine this as a suite of rooms, perhaps for nobles or mages.
 A shot of the second floor. Most of the furnishings are Hirst Arts, though the bed on the right is a scratchbuild with a quilt printed from an online site.
Another angle shot of the second floor. Mainly HA furniture.
Here's a shot of the ground floor bar and patio. Most of the furniture is HA. The narrow table in the upper right is another old scratchbuild.
Another shot of the ground floor. Furniture HA. I used the rug to help hide the clips on the floor.

I'm thinking about making an Inn from foamcore and adding HA pieces for floors and wood planks for the half-timbered look. Might make it a modular collection of rooms like Bruce's latest tutorial on making his Inn, in order to cut down storage space.

Thanks for looking.

Friday, May 10, 2013

Hirst Arts Water Caverns for D&D

Hi, folks. In the last post I ended with a teaser pic showing our Hirst Arts Water Caverns. Ever since I first saw these I've been wanting them. There's even an excellent step by step tutorial on making the Water Caverns. It's a very thorough tutorial, covering everything from casting the pieces, through assembly and layout, painting, even has sections on making water for the river pieces. Well worth a read and full of useful tips, even if you aren't  making a water cavern right now. :)

As I said I really wanted a water cavern, but I didn't own any of the molds. It takes 5 molds to make these which cost $140. Bruce generously offers 10% off for orders between 5-9 molds which cuts the cost to $126 plus $7 shipping for a total of $133. A decent deal, I almost went with that. The problem would have been all of the casting I would have had to do. The project plans say:

Cast Mold #81 ten times
Cast Mold #82 ten times
Cast Mold #85 six times
Cast Mold #281 thirty times
Cast Mold #282 twelve times

That's a lot of casting. And I didn't have a lot of time available. This is where Naloomi's Workshop comes in. He offers a complete Water Cavern Set, already precast, of all of the components you need, plus many extra pieces. Saves a great deal of time. And at $120 it's a steal. So that's what I did. I bought Naloomi's Water Cavern set and then Mark and I constructed it following the Hirst Arts tutorial. Shipping was fast and almost everything arrived perfectly intact. A few of the longer cavern wall pieces were broken in transit. But that wasn't from poor packaging. I have enough bubble wrap from the packaging to start my own packing company. And the few broken pieces were easily glued back together.


Thanks for bearing with me through the text. I wanted to give credit to Hirst Arts and Naloomi's Workshop. Pic time :)

 Here's the Water Cavern set layout connected to the Gothic Dungeon.
This is the broken wall section in the Gothic Dungeon which connects the dungeon to the Water Caverns. That's one of the Orcs from the Wrath of Ashardalon boardgame. You get 42 unpainted plastic D&D minis with the set. We are slowly painting all of them.
 This is from the river opening out into a lake. The room to the right has a treasure pile across a deep chasm. Think that bridge is safe?
 Overhead view.
 Continuing west from the treasure cave.
 Another shot continuing west.
 The river mouth with dock and a bridge.
 This shot from the west shows the connection between dungeon and caverns. The hall with the blue and yellow floor tiles contains the broken wall section entry.
A different shot of the broken wall section.
 This shows the rope bridge. Sir Kaeleth essays crossing the span. I wonder if he noticed that lever behind him? 
 Another shot from the eastern section.
 A shot through the Southern entry arch. Sir Kaeleth is almost there. "Somebody pull the lever!" :)

Thanks for looking. This is a great set. Mark and I had a good time building it. Another nice feature is it is modular and can be laid out in many different patterns. 






Friday, May 3, 2013

Some Dungeon Pics

I've been playing 4th edition Dungeons and Dragons with my sons. I've primarily been the Dungeon Master, but my son Bob has also DMed. We've had some great times playing and my son Mark has helped me make dungeon terrain from Hirst Arts molds. We made some of the Gothic Dungeon set following Bruce Hirst's tutorial from the Hirst Arts website. Here's some pics of the Gothic Dungeon.
 The shot above shows one of the rooms being raised on pillars. The pillars were made from Keurig coffee K-cups. I noticed that K-cups looked to be about the right size to use to raise up rooms in the dungeon for multi-level play. So I cleaned out used K-cups and poured excess plaster from when Mark and I were casting the Gothic molds for the dungeon. They are very strong and almost perfect height for the stairs we made.
Another shot showing the elevated room using K-cup pillars.
A detail shot of the elevated room. It has been dressed with mostly pieces from the Unique Inn Accessories Mold #59, but there are a few other pieces as well.
Another view of the elevated room. This shot shows the bearskin rug in front of the fireplace. I made that from Sculpey polymer clay and am inordinately proud of it.

 Dungeon from a different angle. The room with the blue and silver floor tiles has Knight statues in the alcoves which were purchased from Naloomi's Workshop. I've always gotten great deals and great service from him. He sells pre-cast Hirst Arts bricks and many very nice accessories. More about him later.
Another angle.


 Some of the rooms got special floors, mainly because I was running short of regular floor tiles. :)
 This shows some of the corridor pieces. I tried to keep at least one wall low, for ease of play and visibility of minis.
 The room with the pillars and red and yellow floor tiles is called the King's Hall. The Elf Wizard mini in the King's Hall was painted by my son Bob. He did an awesome job on it. The statues flanking him came out of a Toobs Toys Egypt set. I got mine at Hobby Lobby with a 40% coupon.  The giant sarcophagus in the room with wall pillars (center)  is one I made.
 Another room and corridor with a fancy floor. The trapdoor piece is a custom job by Mark.
A different angle shot. The sarcophagus is another custom job by Mark. He's prolific.

Thanks for looking.  Above is a teaser shot for next post.

Wednesday, April 13, 2011

15mm Space Hulk WIP

Pic below shows a layout from the GW Space Hulk Mission Book made with Hirst Arts sci fi molds.


Hi, folks. I've been doing a little work on a new project. A "15mm sized" Space Hulk. I will also use it for ship interiors in my ongoing X-COM in 15mm project. It's made from Hirst Arts sci-fi molds and I am loosely following Bruce Hirst's Space Hulk plans. I switched out the floor tiles molds he recommended (1.5" floor tiles) for 1" floor tiles, and based it on 3mm art foam. I used the Industrial Edge mold for the walls, but had to substitute many of the larger pieces for the smaller 1" or 1/2" pieces. I'm working on some doors and trying a couple of different options. I'm trying to make some doors with Shrinky Dinks and some doors I will scratchbuild and make a custom mold using an Alumilite Mini Casting Kit. If you're not familiar with them Shrinky Dinks are a polymer film you can print designs on with an ink jet printer, bake in an oven and the film shrinks and thickens. I don't have any pics of them, yet, but they're not too bad. Anyway here's some pics.

Pic below shows Khurasan Miniatures 15mm Space Demons I will use for "GeneStealers".
And here's their opponents, Blue Moon 15mm Orion Republic Heavy Infantry who will sub in for Space Marines. The door pictured behind them is a cut-down version of a sci-fi door from the Hirst Arts Starship Wall Mold.

I haven't decided on a paint scheme, yet. I could go with the sort of silvery blue scheme from the X-Com computer game, but I'm also tempted to go with a sort of olive drab green. I'm hoping to recruit the boys to help me paint this set up, like they did with our full-sized Hirst Arts Space Hulk set we did a while ago, here. Anyway, that's all for now. Thanks for looking.

Saturday, January 29, 2011

Back to Bloggin

Hi, folks. I'm back to blogging. I started a new second job back in November and was able to pick up a bunch of shifts during winter break and on Fridays, Saturdays and Sundays. I ended up with a bunch of 6 or 7 day work weeks in a row, so didn't have much time for anything but work and sleep. Now the schedule has slowed down some and I actually got to work on some projects. Here's what's first in the pipeline:

Small 15mm forward base/fort: made from plaster castings from an Ikea ice cube tray, Hirst Arts bricks and crowned with Combat Wombat Miniatures Defense Turrets (scroll down about 1/3 of the page. I'm also using the Combat Wombat Command Bunker, Command/Medic pods and the new pods from the Bullfrog Lander for the base buildings.

Sorry no pics, yet, maybe tonight.

Thanks for looking,

Luckyjoe

Thursday, November 4, 2010

Some stuff for 15mm Combat Zone

Hi, everyone. I've been working on some 15mm scale minis and buildings for Combat Zone. I split my time between my home and an apartment. At home I game in 28mm and play Combat Zone primarily with the excellent EM4 minis. But my apartment is small so I play in 15mm there. Here's some of the 15mm Combat Zone stuff.

Pic below shows some Khurasan Minis Sepulvedan Resistance Fighters I'm using for Troopers

2 Pics below shows some Khurasan Minis Post-Apoc Road Outlaws I'm using for Gangers


Series of pics below show a couple of Old Crow Goannas to which I added extra weapons from an Old Crow missile turret and tank turret pack. The weapons are on magnet mounts so I can swap them out. The Goannas will be used for the Corporate Troops.

Pic above shows one of the 15mm Old Crow Goannas next to a converted 1/72 scale Bravo Team "Rhino". The Goanna has a 1/2 inch craft magnet glued to the top rear hull for a weapons mount.

Pic Above shows a Goanna with one of the tank turret guns mounted and one of the Sepulvedan Resistance fighter for scale. I think the Goanna works well for size with the Khurasan minis.
Pic below shows one of the Goannas with some of the left over missile mounts from the Old Crow missile turret. The cylindrical piece it is resting on is a rare earth magnet. It holds on well and can be rotated to aim in all directions. Pictured with another Sepulvedan Resistance Fighter.

The pic above shows a different Old Crow Tank Turret gun, this one is a multi-barreled mini-type gun.

Pic below shows a bunker made from Hirst Arts Sci Fi molds with the squad of Troopers. I've had that bunker built for a while but just got around to painting it.

Final pic is some Khurasan 15mm Garn. I may use them as Aliens in a Combat Zone scenario.


I really like these Khurasan minis. Beautiful detail, especially on the Road Outlaws. The Old Crow Goannas were very easy to paint and the Old Crow Turret packs I got, one tank and one missile turret, come with so many different weapons option pieces I have been able to equip 5 vehicles from just those two packs. Great value.
Thanks for looking.

Luckyjoe

Saturday, September 25, 2010

28mm Terrain for Combat Zone

I was inspired a while back by Germy's Combat Zone Project posts on his site, here. If you haven't seen these, you should check them out. I also got back into visiting the Combat Zone Chronicles site. This is a great site with articles on terrain, minis & conversions, scenarios and many other useful features. Once again, if you haven't been there, you should check it out, here. I am really loving the EM4 plastic minis. They're very well made, with very good detail, easy to convert, and very reasonably priced. Here's the EM4 site.
Anyway, I've been working on making some terrain for Combat Zone and here's pics. The first group of pics below are of a mostly demolished ruin made mostly from the Hirst Arts Small Brick mold, and based on a 6" round piece of craft wood. I chose the small brick mold because I think it resembles cinder block. Most of the rubble on the piece was made from putting miscast Hirst Arts bricks from various molds in a plastic bag and whacking it with a hammer. I then glued that debris on to the base. Tried something new with painting these pieces. I filled a spray bottle with magic wash and tinted it black with some craft paint, and used that to spray the ruins, instead of priming and then painting. I was hoping the magic wash would not only paint the ruins and rubble, but also seal it and help hold the rubble onto the base. I think it came out pretty good, and the rubble is holding on to the base pretty well.



The next group of pics is of another ruin. Same construction and painting method. For this one I made a partially destroyed corrugated iron roof. The roof has a frame made from matchsticks. Onto that frame I laid sections of corrugated iron made from cereal card which I ran through a crimping tool. One of the reasons I wanted a roof on this piece was to provide a platform for extra elevation for snipers.





The two pics above show a mattress made from Sculpie polymer clay. I got the idea from an article on the Combat Zone Chronicles called "Putty Rubbish". I made a mattress, a chair and some trash bags a while back. This is the first time they'll see use.
The next group of pics below is of another ruin, this one with a stairway and a little bit of the second floor left.


The pic below shows the sculpie chair I made a while back.


This was a fun little series of builds. I'm really pleased with the way the "black magic wash" worked. It brought out the detail of the unpainted bricks very nicely and helped seal the rubble to the bases. I'll probably continue to use it for the rest of the ruins, though I may make it darker. Thanks for looking and comments are welcome.

Luckyjoe